铁氧体(Ferrite)

  铁氧体的主要成分是钡或锶和三氧化铁,通过粉末冶金的制造工艺生产而成。其材质特点是硬而脆,磁性较强,温度稳定性好,不易退磁,耐腐蚀性好。广泛应用于文具、马达、喇叭、玩具、除铁器等方面。
    
  Ferrite Magnet is produced by powder metallurgical method with chemical composition of Ba/SrO.6Fe2O3.This hard and brittle magnet has the features of powerful magnetism,good temperature stability,good resistance to demagnetization,good corrosion resistance.It is widely used in stationery,motor,speaker,toy,iron separator etc.
    
物理特性  PHYSICAL CHARACTERISTICS
项目 Item 单位 Unit 数值 Value
居里温度  Tc Curie
temperature
0C 450~460
最高工作温度 T
Mam.operating tenp 
0C 250
温度系数
Temp.coefficient
αBr %0C -0.2
αHcj %0C 0.3
回复磁导率  μrec Relative 
recoil permeability
10.5~1.3
密度  D 
Density
g/cm3 4.7~5.1
硬度  H
Hardness
HV 480~580
电阻率  ρ
Resistivity
Ω.cm ≥106

    
磁性特表 MATERIAL CHARACTRRISTICS

牌号 Type No

Y10 Y25 Y30 Y30H Y33

项目 Item

剩磁 Br
Remanence
mT 200-240 360-400 370-400 380-400 410-430
KGs 2.0-2.4 3.6-4.0 3.7-4.0 3.8-4.0 4.1-4.3
矫顽力 Hcb
Coercivity
KA/m 130-160 135-170 175-210 230-275 220-250
KOe 1.63-2.01 1.7-2.41 2.2-2.64 2.89-3.46 2.77-3.14
内禀矫顽力 Hcj
Intrinsic Coercivity
KA/m 210-270 140-200 180-220 235-290 225-255
KOe 2.64-3.4 1.76-2.51 2.26-2.77 2.95-3.65 2.83-3.21
最大磁能积(BH)max 
Max.energy product
KJ/m3 6.5-9.5 22.5-28 26.0-30.0 27.0-32.5 31.5-35.0
MGOe 0.8-1.2 2.8-2.5 3.3-3.8 3.4-4.1 4.0-4.4
  
1、可根据客户要求生产长方行、圆形、瓦形等各种形状,不同充磁方式的等方性和异方性磁体。
   We can provide isotropic and anisotropic magnets in shapes of block, disc, ring, tile with different directions of magnetization according to customer's demand.
    
2、一般方形磁铁尺寸:(Nominal block magnet dimensions)

公差(Tolerance)

长(L) 宽(W) 高(H)
4--150mm 3--100mm 2-26mm
±2% ±2% ±0.2
          
3 、一般圆(环)磁铁尺寸:(Nominal ring magnet dimensions)

公差(Tolerance)

外径(O/Dia) 内径(I/Dia) 高(H)
3-220mm 2--110mm 1--26mm
±2% ±2% ±0.2